4-异丙氧基苯甲醛 |4-Isopropoxybenzaldehyde |cas:18962-05-5|西域试剂

4-异丙氧基苯甲醛 ,4-Isopropoxybenzaldehyde

产品编号：SIGMA-CDS014228| CAS NO：18962-05-5| 分子式：C10H12O2| 分子量：164.2011

ALDH1A3-IN-3（化合物16）是ALDH1A3的有效抑制剂，IC50为0.26μM。ALDH1A3-IN-3也是良好的ALDH3A1底物。ALDH1A3-IN-3可用于前列腺癌的研究。

本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用，

货号	包装	价格	库存与货期	购买量	操作
SIGMA-CDS014228		￥872.00	杭州北京（现货）

增值税发票√顺丰快递√订货电话：18601927057

产品名称

4-异丙氧基苯甲醛

英文名称

4-Isopropoxybenzaldehyde

CAS编号

18962-05-5

产品描述

ALDH1A3-IN-3（化合物16）是ALDH1A3的有效抑制剂，IC50为0.26μM。ALDH1A3-IN-3也是良好的ALDH3A1底物。ALDH1A3-IN-3可用于前列腺癌的研究。

产品沸点

108-110 °C (5 mmHg)

产品密度

1.036

产品闪点

108-110°C/5mm

精确质量

164.08400

PSA

26.30000

LogP

2.28630

蒸气压

0.00982mmHg at 25°C

折射率

1.545-1.547

溶解性数据

In Vitro:

DMSO : 100 mg/mL (609.01 mM; Need ultrasonic)

配制储备液

浓度溶剂体积质量	1 mg	5 mg	10 mg

1 mM	6.0901 mL	30.4507 mL	60.9013 mL
5 mM	1.2180 mL	6.0901 mL	12.1803 mL
10 mM	0.6090 mL	3.0451 mL	6.0901 mL

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80°C, 6 months; -20°C, 1 month (stored under nitrogen)。-80°C 储存时，请在 6 个月内使用，-20°C 储存时，请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用；以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

1.

请依序添加每种溶剂： 10% DMSO 40% PEG300 5% Tween-80 45% saline
Solubility: ≥ 2.5 mg/mL (15.23 mM); Clear solution

此方案可获得 ≥ 2.5 mg/mL (15.23 mM，饱和度未知) 的澄清溶液。
以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。
将 0.9 g 氯化钠，完全溶解于 100 mL ddH₂O 中，得到澄清透明的生理盐水溶液
2.

请依序添加每种溶剂： 10% DMSO 90% corn oil
Solubility: ≥ 2.5 mg/mL (15.23 mM); Clear solution

此方案可获得 ≥ 2.5 mg/mL (15.23 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。
以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。

*以上所有助溶剂都可在西域网站选购。

靶点

IC50: 0.26 μM (ALDH1A3)

稳定性

常温常压下稳定

避免的物料：氧化物碱空气还原剂

储存条件

常温密闭避光，通风干燥

化学品安全说明书(MSDS)

下载MSDS

质检证书(COA)

相关产品

危害码 (欧洲)	Xi:Irritant;
风险声明 (欧洲)	R36/37/38
安全声明 (欧洲)	S37/39-S26
海关编码	2912499000

Name:	4-Isopropoxybenzaldehyde Material Safety Data Sheet
Synonym:	None Known
CAS:	18962-05-5

Section 1 - Chemical Product MSDS Name:4-Isopropoxybenzaldehyde Material Safety Data Sheet
Synonym:None Known

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

CAS#	Chemical Name	content	EINECS#
18962-05-5	4-Isopropoxybenzaldehyde	98%	unlisted

Hazard Symbols: XI
Risk Phrases: 36/37/38

Section 3 - HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Air sensitive.
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled. Can produce delayed pulmonary edema.
Chronic:
Effects may be delayed.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation. Place under an inert atmosphere.

Section 7 - HANDLING and STORAGE
Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing. Avoid contact with skin and eyes. Keep container tightly closed. Avoid ingestion and inhalation. Handle under an inert atmosphere. Store protected from air. Wash clothing before reuse.
Storage:
Store in a cool, dry place. Store in a tightly closed container. Do not expose to air. Store under an inert atmosphere.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 18962-05-5: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Clear liquid
Color: colorless to yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 108 - 110 deg C @ 5 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C10H12O2
Molecular Weight: 164.21

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures. Air sensitive.
Conditions to Avoid:
Exposure to air.
Incompatibilities with Other Materials:
Strong bases, strong oxidizing agents, strong reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 18962-05-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Isopropoxybenzaldehyde - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 18962-05-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 18962-05-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 18962-05-5 is not listed on the TSCA inventory.
It is for research and development use only.

SECTION 16 - ADDITIONAL INFORMATION
N/A