1-(4-Nitrophenylsulfonyl)piperidine |1-(4-Nitrophenylsulfonyl)piperidine |cas:64268-93-5|西域试剂

1-(4-Nitrophenylsulfonyl)piperidine ,1-(4-Nitrophenylsulfonyl)piperidine

产品编号：SIGMA-PH011403| CAS NO：64268-93-5| 分子式：C11H14N2O4S| 分子量：270.3049

VP-4509，一种抗甲氧西林耐药金黄色葡萄球菌（MRSA）试剂，MIC为49.3 µM.VP-4509对革兰氏阴性细菌铜绿假单胞菌也具有很高的抗菌活性。

本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用，

货号	包装	价格	库存与货期	购买量	操作
SIGMA-PH011403		￥1944.00	杭州北京（现货）

增值税发票√顺丰快递√订货电话：18601927057

产品名称

1-(4-Nitrophenylsulfonyl)piperidine

英文名称

1-(4-Nitrophenylsulfonyl)piperidine

CAS编号

64268-93-5

产品描述

VP-4509，一种抗甲氧西林耐药金黄色葡萄球菌（MRSA）试剂，MIC为49.3 µM.VP-4509对革兰氏阴性细菌铜绿假单胞菌也具有很高的抗菌活性。

产品熔点

166ºC

产品沸点

435.9ºC at 760 mmHg

产品密度

1.374g/cm3

产品闪点

217.4ºC

精确质量

270.06700

PSA

91.58000

LogP

3.31130

折射率

1.592

溶解性数据

In Vitro:

DMSO : 25 mg/mL (92.49 mM; ultrasonic and warming and heat to 60°C)

配制储备液

浓度溶剂体积质量	1 mg	5 mg	10 mg

1 mM	3.6996 mL	18.4980 mL	36.9959 mL
5 mM	0.7399 mL	3.6996 mL	7.3992 mL
10 mM	0.3700 mL	1.8498 mL	3.6996 mL

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80°C, 6 months; -20°C, 1 month (protect from light)。-80°C 储存时，请在 6 个月内使用，-20°C 储存时，请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用；以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

1.

请依序添加每种溶剂： 10% DMSO 90% corn oil
Solubility: 2.5 mg/mL (9.25 mM); Suspended solution; Need ultrasonic

此方案可获得 2.5 mg/mL (9.25 mM) 的均匀悬浊液，悬浊液可用于口服和腹腔注射。
以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。

*以上所有助溶剂都可在西域网站选购。

化学品安全说明书(MSDS)

下载MSDS

质检证书(COA)

相关产品

海关编码	2935009090

Material Safety Data Sheet

Section1. Identiﬁcation of the substance
1-[(4-Nitrophenyl)sulfonyl]piperidine
Product Name:
Synonyms:

Section2. Hazards identiﬁcation

Harmful by inhalation, in contact with skin, and if swallowed.
H315:Causes skin irritation
H319:Causes serious eye irritation
H335:May cause respiratory irritation
P261:Avoid breathing dust/fume/gas/mist/vapours/spray
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing
P302+P352:IF ON SKIN: Wash with soap and water
P321:Speciﬁc treatment (see on this label)
P405:Store locked up

Section3. Composition/information on ingredients.
1-[(4-Nitrophenyl)sulfonyl]piperidine
Ingredient name:
CAS number:64268-93-5

Section4. First aid measures
Immediately wash skin with copious amounts of water for at least 15 minutes while removing
Skin contact:
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
ﬂushing of the eyes by separating the eyelids with ﬁngers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
Ingestion:

Section5. Fire ﬁghting measures
In the event of a ﬁre involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualiﬁed
in the handling and use of potentially hazardous chemicals, who should take into account the ﬁre,
health and chemical hazard data given on this sheet.
Storage:Store in closed vessels.

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Not speciﬁed
Appearance:
Boiling point:No data
Melting point:No data
Flash point:No data
Density:No data
Molecular formula:C11H14N2O4S
Molecular weight:270.3

Section10. Stability and reactivity
Conditions to avoid: Heat, ﬂames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, sulfur oxides.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
Non-harzardous for air and ground transportation.

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

SECTION 16 - ADDITIONAL INFORMATION
N/A