EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
Causes eye burns. Low vapor concentrations may cause a temporary visual disturbance known as 'blue haze' or 'halo vision'.
Skin:
Harmful if absorbed through the skin. Causes skin burns. Causes symptoms similar to those of inhalation. Amines have been known to cause skin irritation and sensitization.
Ingestion:
May cause severe irritation of the digestive tract. Ingestion may cause headache, nausea, and vomiting.
Inhalation:
Causes respiratory tract irritation. May cause pulmonary edema and severe respiratory disturbances. May cause central nervous system effects such as nausea and headache.
Chronic:
Chronic exposure may cause effects similar to those of acute exposure.

---

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

---

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Use water spray to keep fire-exposed containers cool. Combustible liquid and vapor. Approach fire from upwind to avoid hazardous vapors and toxic decomposition products.
Extinguishing Media:
Water or foam may cause frothing. Use water spray, dry chemical, carbon dioxide, or chemical foam.

---

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Remove all sources of ignition.
Provide ventilation.

---

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Keep away from heat and flame. Do not breathe vapor or mist.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container.

---

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels. Use a corrosion-resistant ventilation system.
Exposure Limits CAS# 621-77-2: Personal Protective Equipment Eyes: Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

---

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear, colorless to pale yellow
Odor: ammonia-like
pH: Not available.
Vapor Pressure: 0.03 mm Hg @ 20 deg C
Viscosity: Not available.
Boiling Point: 240 deg C @ 760 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 91 deg C ( 195.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble in water
Specific Gravity/Density: 0.7907
Molecular Formula: C15H33N
Molecular Weight: 227.43

---

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures. Amines absorb carbon dioxide from the air to form carbamate salts.
Conditions to Avoid:
Ignition sources, excess heat, Many amines are corrosive to copper, copper alloys (e.g. brass), aluminum, zinc, zinc alloys, galvanized surfaces..
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, acid chlorides, acid anhydrides.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: Will not occur.

---

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 621-77-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tripentylamine - Not listed by ACGIH, IARC, or NTP.

---

Section 12 - ECOLOGICAL INFORMATION

---

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

---

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

---

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 621-77-2: No information available.
Canada
CAS# 621-77-2 is listed on Canada's DSL List.
CAS# 621-77-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 621-77-2 is listed on the TSCA inventory.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A