1,2-二硝基苯,分析标准品,HPLC≥99.9%
产品编号:西域质检-TM54262| CAS NO:528-29-0| 分子式:C6H4N2O4| 分子量:168.107
本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用,
1,2-二硝基苯
This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO 9001.

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level(k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.
The balances used for gravimetric measurements are calibrated with weights traceable to the national standards. The calibration of the balances is verified annually by an external accredited calibration service. This analysis method has been verified using an approach consistent with ISO 17034:2016 & ISO 17025:2017.
CERTIFICATE ON | QC SIGNATURE | |
2021-Feb-02 |
![]() |
RM Release |
This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.
This reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature here in. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture.
Read Material Safety Data Sheet (MSDS) and understand any potential hazard(s) prior to the use of this product. All chemicals should be considered potentially hazardous in nature and should only be handled by qualified personnel using established good laboratory practices.
Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.
It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample.Visit the support section of our website technology videos and frequently asked questions.
相关文档
化学品安全说明书(MSDS)
下载MSDS质检证书(COA)
相关产品
符号 |
![]() ![]() ![]() GHS06, GHS08, GHS09 |
---|---|
信号词 | Danger |
危害声明 | H300 + H310 + H330-H373-H410 |
警示性声明 | P260-P264-P273-P280-P284-P301 + P310 |
个人防护装备 | dust mask type N95 (US);Eyeshields;Faceshields;Gloves;type P2 (EN 143) respirator cartridges |
危害码 (欧洲) | T+:Verytoxic;N:Dangerous for the environment; |
风险声明 (欧洲) | R26/27/28;R33;R50/53 |
安全声明 (欧洲) | S28-S36/37-S45-S60-S61-S28A |
危险品运输编码 | UN 3443 6.1/PG 2 |
WGK德国 | 3 |
RTECS号 | CZ7450000 |
包装等级 | II |
危险类别 | 6.1(a) |
海关编码 | 29042000 |
2.对环境的影响: 一、健康危害 侵入途径:吸入、食入、经皮吸收。 健康危害:本品为强烈的高铁血红蛋白形成剂。易经皮肤吸收。 急性中毒:有头痛、头晕、乏力、皮肤粘膜紫绀、手指麻木等症状;严重时可出现胸闷、呼吸困难、心悸,甚至心律紊乱、昏迷、抽搐、呼吸麻痹。有时中毒后出现溶血性贫血、黄疸、中毒性肝炎。 慢性中毒:可有神经衰弱综合征;慢性溶血时,可出现贫血、黄疸;可引起中毒性肝病。 二、毒理学资料及环境行为 毒性:属高毒类。 急性毒性:人经口5mg/kg,最小致死剂量。 危险特性:易燃,遇明火、高热易燃。与氧化剂混合能形成爆炸性混合物。经摩擦、震动或撞击可引起燃烧或爆炸。 燃烧(分解)产物:一氧化碳、二氧化碳、氧化氮。 3.现场应急监测方法: 4.实验室监测方法: 丁酮、碱分光光度法《水质分析大全》张宏陶等主编 气相色谱法《水质分析大全》张宏陶等主编 气相色谱法《固体废弃物试验分析评价手册》中国环境监测总站等译 5.环境标准: 中国(TJ36-79)车间空气中有害物质的最高容许浓度 1mg/m3[皮] 中国(待颁布)饮用水源中有害物质的最高容许浓度 0.5mg/L 6.应急处理处置方法: 一、泄漏应急处理 隔离泄漏污染区,限制出入。切断火源。建议应急处理人员戴自给式呼吸器,穿防毒服。不要直接接触泄漏物。小量泄漏:避免扬尘,用洁净的铲子收集于干燥、洁净、有盖的容器中。大量泄漏:收集回收或运至废物处理场所处置。 废弃物处置方法:建议用焚烧法。焚烧炉排出的氮氧化物通过洗涤器、催化氧化装置或高温装置除去。处理稀的废液应先经过浓缩,再进行焚烧。 二、防护措施 呼吸系统防护:可能接触其粉尘时,必须佩戴头罩型电动送风过滤式防尘呼吸器。紧急事态抢救或撤离时,佩戴空气呼吸器。 眼睛防护:呼吸系统防护中已作防护。 身体防护:穿胶布防毒衣。 手防护:戴防苯耐油手套。 其它:工作现场禁止吸烟、进食和饮水。及时换洗工作服。工作前后不饮酒 ,用温水洗澡。实行就业前和定期的体检。 三、急救措施 皮肤接触:立即脱去被污染的衣着,用肥皂水和清水彻底冲洗皮肤。就医。 眼睛接触:提起眼睑,用流动清水或生理盐水冲洗。就医。 吸入:迅速脱离现场至空气新鲜处。保持呼吸道通畅。如呼吸困难,给输氧。如呼吸停止,立即进行人工呼吸。就医。 食入:饮足量温水,催吐,就医。 灭火方法:消防人员须佩戴防毒面具、穿全身消防服。灭火剂:水、泡沫、二氧化碳、砂土。 |
上游产品 10 | |
---|---|
下游产品 10 | |