EDANS 1,5-EDANS|cas:50402-56-7|西域试剂

EDANS 1,5-EDANS,99.95%

产品编号：Bellancom-D1080| CAS NO：50402-56-7| 分子式：C₁₂H₁₄N₂O₃S| 分子量：266.32

EDANS (1,5-EDANS) 是一种新型的淬灭荧光底物 (fluorogenic substrate)，用于通过共振能量转移分析逆转录病毒蛋白酶。

本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用，

货号	包装	价格	库存与货期	购买量	操作
Bellancom-D1080		￥500.00	杭州北京（现货）

增值税发票√顺丰快递√订货电话：18601927057

EDANS 1,5-EDANS

产品介绍

EDANS (1,5-EDANS) 是一种新型的淬灭荧光底物 (fluorogenic substrate)，用于通过共振能量转移分析逆转录病毒蛋白酶。

生物活性

EDANS (1,5-EDANS) is a novel and quenched fluorogenic substrate for assaying retroviral protease by resonance energy transfer (RET).

体外研究

The peptide sequence of EDANS is derived from a natural processing site for HIV-1 PR.
Incubation of recombinant HIV-1 PR with the fluorogenic substrate resulted in specific cleavage at the Tyr-Pro bond and a time-dependent increase in fluorescence intensity that was linearly related to the extent of substrate hydrolysis.

西域 has not independently confirmed the accuracy of these methods. They are for reference only.

体内研究

性状

Solid

溶解性数据

In Vitro:

DMSO : 13.89 mg/mL (52.16 mM; Need ultrasonic)

配制储备液

浓度溶剂体积质量	1 mg	5 mg	10 mg

1 mM	3.7549 mL	18.7744 mL	37.5488 mL
5 mM	0.7510 mL	3.7549 mL	7.5098 mL
10 mM	0.3755 mL	1.8774 mL	3.7549 mL

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)。-80°C 储存时，请在 6 个月内使用，-20°C 储存时，请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用；以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

1.

请依序添加每种溶剂： 10% DMSO 40% PEG300 5% Tween-80 45% saline
Solubility: ≥ 1.39 mg/mL (5.22 mM); Clear solution

此方案可获得 ≥ 1.39 mg/mL (5.22 mM，饱和度未知) 的澄清溶液。
以 1 mL 工作液为例，取 100 μL 13.9 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。
将 0.9 g 氯化钠，完全溶解于 100 mL ddH₂O 中，得到澄清透明的生理盐水溶液
2.

请依序添加每种溶剂： 10% DMSO 90% (20% SBE-β-CD in saline)
Solubility: ≥ 1.39 mg/mL (5.22 mM); Clear solution

此方案可获得 ≥ 1.39 mg/mL (5.22 mM，饱和度未知) 的澄清溶液。
以 1 mL 工作液为例，取 100 μL 13.9 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。
将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
3.

请依序添加每种溶剂： 10% DMSO 90% corn oil
Solubility: ≥ 1.39 mg/mL (5.22 mM); Clear solution

此方案可获得 ≥ 1.39 mg/mL (5.22 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。
以 1 mL 工作液为例，取 100 μL 13.9 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。

*以上所有助溶剂都可在西域网站选购。

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

4°C, protect from light, stored under nitrogen

*In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)

参考文献

. E D Matayoshi, et al. Novel fluorogenic substrates for assaying retroviral proteases by resonance energy transfer. Science. 1990 Feb 23;247(4945):954-8. [Content Brief]

化学品安全说明书(MSDS)

下载MSDS

质检证书(COA)

产品编号(Item Number)

批号(Lot Number)

相关产品

危害码 (欧洲)	Xn: Harmful;
风险声明 (欧洲)	22-36/37/38-43
安全声明 (欧洲)	S26-S27-S36/37/39-S45
WGK德国	3
海关编码	2921590090

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name: 5-(2-Aminoethylamino)-1-naphthalenesulfonic acid
REACH No.: A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later

registration deadline.
CAS-No.: 50402-56-7
Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 4), H302
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Skin sensitisation (Category 1), H317
Specific target organ toxicity - single exposure (Category 3), H335
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xn HarmfulR22, R36/37/38, R43
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal wordWarning
Hazard statement(s)
H302Harmful if swallowed.
H315Causes skin irritation.
H317May cause an allergic skin reaction.
H319Causes serious eye irritation.
H335May cause respiratory irritation.
Precautionary statement(s)
P261Avoid breathing dust.
P280Wear protective gloves.
P305 + P351 + P338IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazardnone
Statements
Other hazards - none

SECTION 3: Composition/information on ingredients
Substances
Chemical characterization : Natural product
Synonyms: N-(Aminoethyl)-5-naphthylamine-1-sulfonic acid
1,5-EDANS
Formula: C12H14N2O3S
Molecular Weight: 266,32 g/mol
CAS-No.: 50402-56-7
EC-No.: 256-575-5
Hazardous ingredients according to Regulation (EC) No 1272/2008
ComponentClassificationConcentration
5-(2-Aminoethylamino)naphthalene-1-sulphonic acid
CAS-No.50402-56-7Acute Tox. 4; Skin Irrit. 2; Eye <= 100 %
EC-No.256-575-5Irrit. 2; Skin Sens. 1; STOT SE
3; H302, H315, H317, H319,
H335
Hazardous ingredients according to Directive 1999/45/EC
ComponentClassificationConcentration
5-(2-Aminoethylamino)naphthalene-1-sulphonic acid
CAS-No.50402-56-7Xn, R22 - R36/37/38 - R43<= 100 %
EC-No.256-575-5
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx), Sulphur oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone +49 (0)6659 87300, test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must
be evaluated by an industrial hygienist and safety officer familiar with the specific situation of
anticipated use by our customers. It should not be construed as offering an approval for any
specific use scenario.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) AppearanceForm: solid
b) Odourno data available
c) Odour Thresholdno data available
d) pHno data available
e) Melting point/freezingMelting point/range: 300 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash pointno data available
h) Evapouration rateno data available
i) Flammability (solid, gas) no data available
j) Upper/lowerno data available
flammability or
explosive limits
k) Vapour pressureno data available
l) Vapour densityno data available
m) Relative densityno data available
n) Water solubilityno data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignitionno data available
temperature
q) Decompositionno data available
temperature
r) Viscosityno data available
s) Explosive propertiesno data available
t) Oxidizing propertiesno data available
Other safety information
no data available

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
Germ cell mutagenicity
no data available
Carcinogenicity
IARC:No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: -IMDG: -IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA:Not dangerous goods
Transport hazard class(es)
ADR/RID: -IMDG: -IATA: -
Packaging group
ADR/RID: -IMDG: -IATA: -
Environmental hazards
ADR/RID: noIMDG Marine pollutant: noIATA: no
Special precautions for user
no data available

SECTION 15 - REGULATORY INFORMATION
N/A

SECTION 16 - ADDITIONAL INFORMATION
N/A

5419-77-2

107-15-3

50402-56-7

文献：O'Connor, Naphtali A.; Sakata, Steven T.; Zhu, Huide; Shea, Kenneth J. Organic Letters, 2006 , vol. 8, # 8 p. 1581 - 1584

上游产品 2
5419-77-2 107-15-3
下游产品 0

[1]. E D Matayoshi, et al. Novel fluorogenic substrates for assaying retroviral proteases by resonance energy transfer. Science. 1990 Feb 23;247(4945):954-8.

EDANS 1,5-EDANS,99.95%

EDANS 1,5-EDANS

化学品安全说明书(MSDS)

质检证书(COA)

在线咨询