Amino-PEG4-alcohol|cas:86770-74-3|西域试剂

Amino-PEG4-alcohol,98.0%

产品编号：Bellancom-W008005| CAS NO：86770-74-3| 分子式：C₈H₁₉NO₄| 分子量：193.24

Amino-PEG4-alcohol 是一种基于 PEG 的 PROTAC linker，可以用于合成 PROTAC。Amino-PEG4-alcohol 也是一个不可降解的 ADC linker，用于抗体药物结合物 (ADC) 的合成。

本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用，

货号	价格	库存与货期
Bellancom-W008005	￥200.00	杭州北京（现货）
Bellancom-W008005	￥280.00	杭州北京（现货）
Bellancom-W008005	￥350.00	杭州北京（现货）

增值税发票√顺丰快递√订货电话：18601927057

Amino-PEG4-alcohol

产品介绍

Amino-PEG4-alcohol 是一种基于 PEG 的 PROTAC linker，可以用于合成 PROTAC。Amino-PEG4-alcohol 也是一个不可降解 (non-cleavable) 的 ADC linker，用于抗体偶联活性分子 (ADC) 的合成。

生物活性

Amino-PEG4-alcohol is a PEG-based PROTAC linker can be used in the synthesis of PROTACs. Amino-PEG4-alcohol is also a non-cleavable 4 unit PEG ADC linker used in the synthesis of antibody-drug conjugates (ADCs).

体外研究

PROTACs contain two different ligands connected by a linker; one is a ligand for an E3 ubiquitin ligase and the other is for the target protein. PROTACs exploit the intracellular ubiquitin-proteasome system to selectively degrade target proteins. ADCs are comprised of an antibody to which is attached an ADC cytotoxin through an ADC linker.

西域 has not independently confirmed the accuracy of these methods. They are for reference only.

体内研究

性状

Liquid

溶解性数据

In Vitro:

DMSO : ≥ 100 mg/mL (517.49 mM)

H₂O : 50 mg/mL (258.75 mM; Need ultrasonic)

* "≥" means soluble, but saturation unknown.

配制储备液

浓度溶剂体积质量	1 mg	5 mg	10 mg

1 mM	5.1749 mL	25.8746 mL	51.7491 mL
5 mM	1.0350 mL	5.1749 mL	10.3498 mL
10 mM	0.5175 mL	2.5875 mL	5.1749 mL

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80°C, 6 months; -20°C, 1 month (protect from light)。-80°C 储存时，请在 6 个月内使用，-20°C 储存时，请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用；以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

1.

请依序添加每种溶剂： PBS
Solubility: 100 mg/mL (517.49 mM); Clear solution; Need ultrasonic

*以上所有助溶剂都可在西域网站选购。

运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

4°C, protect from light

*In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)

参考文献

. Nello Mainolfi, et al. Protein degraders and uses thereof. WO2019060742A1.

. Miller MA, et al. Modular Nanoparticulate Prodrug Design Enables Efficient Treatment of Solid Tumors Using Bioorthogonal Activation. ACS Nano. 2018 Dec 26;12(12):12814-12826. [Content Brief]

化学品安全说明书(MSDS)

下载MSDS

质检证书(COA)

产品编号(Item Number)

批号(Lot Number)

相关产品

海关编码	2922509090

Material Safety Data Sheet

Section1. Identiﬁcation of the substance
Product Name: 1-Amino-3,6,9-trioxaundecanyl-11-ol
Synonyms:

Section2. Hazards identiﬁcation
Harmful by inhalation, in contact with skin, and if swallowed.

Section3. Composition/information on ingredients.
Ingredient name:1-Amino-3,6,9-trioxaundecanyl-11-ol
CAS number:86770-74-3

Section4. First aid measures
Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
ﬂushing of the eyes by separating the eyelids with ﬁngers. If irritation persists, seek medical
attention.
Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section5. Fire ﬁghting measures
In the event of a ﬁre involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution:Wear approved mask/respirator
Hand precaution:Wear suitable gloves/gauntlets
Skin protection:Wear suitable protective clothing
Eye protection:Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section7. Handling and storage
Handling:This product should be handled only by, or under the close supervision of, those properly qualiﬁed
in the handling and use of potentially hazardous chemicals, who should take into account the ﬁre,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

Section8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section9. Physical and chemical properties
Appearance:Not speciﬁed
Boiling point:No data
No data
Melting point:
Flash point:No data
Density:No data
Molecular formula:C8H19NO4
Molecular weight:193.2

Section10. Stability and reactivity
Conditions to avoid: Heat, ﬂames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

Section11. Toxicological information
No data.

Section12. Ecological information
No data.

Section13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section14. Transportation information
Non-harzardous for air and ground transportation.

Section15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

SECTION 16 - ADDITIONAL INFORMATION
N/A