氮化硼, 99.9%,Boron nitride

产品编号:西域试剂-WR362245| CAS NO:10043-11-5| MDL NO:MFCD00011317| 分子式:BN| 分子量:24.82

本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用,

货号 包装 价格 库存与货期 购买量 操作
西域试剂-WR362245
76.00 杭州 北京(现货)
西域试剂-WR362245
206.00 杭州 北京(现货)
西域试剂-WR362245
638.00 杭州 北京(现货)
西域试剂-WR362245
2112.00 杭州 北京(现货)

增值税发票√顺丰快递√订货电话:18601927057

产品名称氮化硼, 99.9%
英文名称Boron nitride
CAS编号10043-11-5
产品熔点2700ºC (sublimes)
产品密度2.29
精确质量25.012381
PSA23.79000
外观性状白色粉末或半透明的晶体
折射率1.728
稳定性

常温常压下稳定

避免光,明火,高温。与石墨性质相似,有良好的电绝缘性、导热性和耐化学腐蚀性。抗氧化性能甚强,在高温时也具有良好的润滑性,是一种优良的高温固体润滑剂。具有很强的中子吸收能力。化学性质稳定,对几乎所有的熔融金属都呈化学惰性。氮化硼不溶于冷水,与水煮沸时水解非常缓慢,产生少量硼酸和氨。与弱酸和强碱在室温时均不起反应,微溶于热酸,用熔融的氢氧化钾处理方能分解,氯气也只能在赤热的条件下方与它起反应。能耐高温至2000 ℃。具备便于机械加工的优良性能。立方晶型氮化硼硬度与金刚石相当,在1500~1600 ℃高温中稳定性优于金刚石。

氮化硼纤维:属多晶BN纤维。熔点300℃;直径4~6μm;密度1.8~1.9g/cm3;强度约2GPa;模量340~350GPa。氮化硼纤维与某些无机纤维相比,具有耐高温、耐化学腐蚀、电热性能好、耐辐射等优良特性。它的抗氧化温度比碳纤维、硼纤维的高,在惰性条件下,2500℃以上仍保持稳定;在氧化气氛中,850℃仍是稳定的。

六方晶系结晶。用高压高温处理所制得的是立方晶系结晶。六方晶系氮化硼的晶体结构和物理性质类似于石墨(但具有电绝缘性)。也称白石墨(white graphite)。莫氏硬度为2,具有优越的润滑性。在氧化气氛中约800℃,在惰性气体气氛中约3000℃是稳定的。不被熔融金属和矿渣所润湿。电绝缘性好,无毒,立方晶系氮化硼具有比金刚石还强的硬度。
储存条件

氮化硼贮存方法:应贮存在通风良好的干燥库房内,防止受潮。

氮化硼纤维贮存方法:贮存于通风良好、干燥库房内。空气中允许氮化硼最高浓度为6mg/m3。

相关文档

化学品安全说明书(MSDS)

下载MSDS

质检证书(COA)

相关产品


个人防护装备 dust mask type N95 (US);Eyeshields;Gloves
危害码 (欧洲) Xi:Irritant
风险声明 (欧洲) R36/37
安全声明 (欧洲) S26-S36
危险品运输编码 UN1950
RTECS号 ED7800000
危险类别 2.1
Version 1.4
Regulation (EC) No 1907/2006

1 - Product and Company Information

Product NameBORON NITRIDE, POWDER, CA. 1 MICRON, 98%

2 - Hazards Identification

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Irritating to eyes and respiratory system.

3 - Composition/Information on Ingredients

Product NameCAS #EC noAnnex I
Index Number
BORON NITRIDE10043-11-5 233-136-6 None
FormulaBN
Molecular Weight 24,8200 AMU
SynonymsBN 40SHP * Borazon * Boron mononitride * BZN 550
* Denka boron nitride GP * Denka GP * Elbor *
Elbor LO 10B1-100 * Elboron * Elbor R * Elbor RM
* Geksanit R * Hexanite R * Hexanit R * KBN-H10
* Kubonit * Kubonit KR * Sho BN * Sho BN HPS *
SP 1 * SP 1 (Nitride) * Super mighty M * UHP-Ex
* Wurzin

4 - First Aid Measures

AFTER INHALATION
If inhaled, remove to fresh air. If not breathing give
artificial respiration. If breathing is difficult, give oxygen.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact, immediately flush eyes with copious amounts
of water for at least 15 minutes.
AFTER INGESTION
ALDRICHwww.molbase.com
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

5 - Fire Fighting Measures

EXTINGUISHING MEDIA
Suitable: Noncombustible. Use extinguishing media appropriate to
surrounding fire conditions.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

6 - Accidental Release Measures

PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Wear respirator, chemical safety goggles, rubber boots, and
heavy rubber gloves.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

7 - Handling and Storage

HANDLING
Directions for Safe Handling: Do not breathe dust. Avoid contact
with eyes, skin, and clothing. Avoid prolonged or repeated
exposure.
STORAGE
Conditions of Storage: Keep container closed. Store in a cool
dry place.
SPECIAL REQUIREMENTS: Hygroscopic.

8 - Exposure Controls / Personal Protection

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling.
PERSONAL PROTECTIVE EQUIPMENT
Special Protective Measures: Wear appropriate government approved
respirator, chemical-resistant gloves, safety goggles, other
protective clothing.

9 - Physical and Chemical Properties

AppearanceColor: Faintly beige
Form: Powder
PropertyValueAt Temperature or Pressure
ALDRICHwww.molbase.com
pH N/A
BP/BP RangeN/A
MP/MP RangeN/A
Flash PointN/A
FlammabilityN/A
Autoignition TempN/A
Oxidizing Properties N/A
Explosive Properties N/A
Explosion LimitsN/A
Vapor PressureN/A
SG/Density2,2900 g/cm3
Partition Coefficient N/A
ViscosityN/A
Vapor DensityN/A
Saturated Vapor Conc. N/A
Evaporation RateN/A
Bulk DensityN/A
Decomposition Temp.N/A
Solvent ContentN/A
Water ContentN/A
Surface TensionN/A
ConductivityN/A
Miscellaneous DataN/A
SolubilityN/A

10 - Stability and Reactivity

STABILITY
Conditions of Instability: Moisture.
Conditions to Avoid: Moisture.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Nature of decomposition products
not known.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

11 - Toxicological Information

RTECS NUMBER: ED7800000
SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Eye Contact: Causes eye irritation.
Inhalation: Material is irritating to mucous membranes and upper
respiratory tract.
Multiple Routes: May be harmful by inhalation, ingestion, or
skin absorption.

12 - Ecological Information

No data available.

13 - Disposal Considerations
ALDRICHwww.molbase.com

SUBSTANCE DISPOSAL
Bury in a landfill site approved for the disposal of chemical and
hazardous wastes. Observe all federal, state, and local
environmental regulations.

14 - Transport Information

RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

15 - Regulatory Information

CLASSIFICATION AND LABELING ACCORDING TO EU DIRECTIVES
INDICATION OF DANGER: Xi
Irritant.
R-PHRASES: 36/37
Irritating to eyes and respiratory system.
S-PHRASES: 26-36
In case of contact with eyes, rinse immediately with plenty of
water and seek medical advice. Wear suitable protective
clothing.
COUNTRY SPECIFIC INFORMATION
Germany
WGK: 3
Self-Classification

16 - Other Information

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICHwww.molbase.com


SECTION 16 - ADDITIONAL INFORMATION
N/A

服务热线

13911702513
18601927057

微信客服