二硅化铁, 99.9% trace metals basis,Iron disilicide
产品编号:西域试剂-WR363603| CAS NO:12022-99-0| MDL NO:MFCD00016087| 分子式:FeSi2| 分子量:112.02
本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用,
英文名称 | Iron disilicide |
---|---|
CAS编号 | 12022-99-0 |
产品熔点 | 1220ºC |
产品密度 | 4.75 |
精确质量 | 115.92000 |
外观性状 | Powder | gray |
溶解性 | Insoluble in water. |
稳定性 | 常温常压下稳定 避免光,明火,高温。钢灰色的不透明体。在EtONa存在下与EtOH反应生成Si(OEt)4。用作焊接助熔剂的脱氧剂、湿度传感器、FeSi2热电偶、热电太阳能电池。 |
储存条件 | 常温密闭,阴凉通风干燥处 |
相关文档
化学品安全说明书(MSDS)
下载MSDS质检证书(COA)
相关产品
风险声明 (欧洲) | R36/37/38 |
---|---|
安全声明 (欧洲) | S26-S37 |
危险品运输编码 | NONH for all modes of transport |
Section 1: Product Identification Chemical Name:Iron silicide, 99% CAS Registry Number:12022-99-0 Formula:FeSi2 EINECS Number:234-671-8 Chemical Family:metal silicide Synonym:Ferrosilicon
Section 2: Composition and Information on Ingredients IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL) Title Compound12022-99-0100%no datano data Section 3: Hazards Identification Emergency Overview:May be irritating to skin and eyes and respiratory tract. Primary Routes of Exposure:Ingestion, inhalation Eye Contact:May be a mild to severe irritant to the eyes. Skin Contact:May cause slight to mild irritation of the skin. Inhalation:Do not breath dust. Inhalation of powder may lead to irritation of the respiratory tract. Ingestion:Ingestion may lead to vomiting, and diarrhea. Acute Health Affects:May be irritating to skin, eyes, mucous membranes and respiratory tract. Do not breath dust. Chronic Health Affects:No information available on long-term chronic effects. NTP:No IARC:No OSHA:No SECTION 4: First Aid Measures Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need Eye Exposure: assistance in keeping their eye lids open. Get immediate medical attention. Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if Skin Exposure: irritation persists. Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty Inhalation: in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce Ingestion: vomiting only if directed by medical personnel. SECTION 5: Fire Fighting Measures Flash Point:not applicable Autoignition Temperature:none Explosion Limits:none Extinguishing Medium:carbon dioxide, foam or dry powder If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure Special Fire Fighting Procedures: self- contained breathing apparatus and full protective clothing. Hazardous Combustion andIf involved in a fire this material may produce silica dust. Decomposion Products: Unusual Fire or Explosion Hazards: Flammable solid. Dust may form explosive mixtures with air. Evolves flammable hydrogen with steam. SECTION 6: Accidental Release Measures In the case of a spill, the material should be covered with dry soda ash, limestone, or sand. Place in open Spill and Leak Procedures: container. Flammable hydrogen evolution may occur if wet. SECTION 7: Handling and Storage Store in a tightly sealed container in a cool dry place. Use good housekeeping practice to avoid accumulation Handling and Storage: of spilled dust, a fire hazard. SECTION 8: Exposure Controls and Personal Protection Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory. Skin Protection:Wear protective clothing and gloves. Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood. If ventilation is not available a respirator should be worn. The use of respirators requires a Respirator Respirator: Protection Program to be in compliance with 29 CFR 1910.134. Ventilation:Material may form a fine dust. If possible, handle the material in an efficient fume hood. Additional Protection:No additional protection required. SECTION 9: Physical and Chemical Properties Color and Form:gray pwdr. Molecular Weight:112.02 Melting Point:1220 °C Boiling Point:no data Vapor Pressure:no data Specific Gravity:4.75 Odor:none Solubility in Water:insoluble SECTION 10: Stability and Reactivity Stability:air and moisture stable Hazardous Polymerization:no hazardous polymerization Conditions to Avoid:Mixtures of fine dust with air. Contact with an ignition source. Incompatibility:Oxidizing agents and halogens Decomposition Products:none SECTION 11: Toxicological Information RTECS Data:No information available in the RTECS files. Carcinogenic Effects:No data Mutagenic Effects:No data Tetratogenic Effects:No data SECTION 12: Ecological Information Ecological Information:No information available SECTION 13: Disposal Considerations Disposal:Dispose of according to local, state and federal regulations. SECTION 14: Transportation Shipping Name (CFR):Non-hazardous Hazard Class (CFR):NA Additional Hazard Class (CFR):NA Packaging Group (CFR):NA UN ID Number (CFR):NA Shipping Name (IATA):Non-hazardous Hazard Class (IATA):NA Additional Hazard Class (IATA):NA Packaging Group (IATA):NA UN ID Number (IATA):NA SECTION 15: Regulatory Information TSCA:Listed in the TSCA inventory. SARA (Title 313):Title compound not listed. Second Ingredient:None SECTION 16 - ADDITIONAL INFORMATION N/A |