硫化锆, 99.99% metals basis,Zirconium Sulfide
产品编号:西域试剂-WR364860| CAS NO:12039-15-5| 分子式:S2Zr| 分子量:155.4
本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用,
英文名称 | Zirconium Sulfide |
---|---|
CAS编号 | 12039-15-5 |
产品熔点 | 1550ºC |
产品密度 | 3,87 g/cm3 |
精确质量 | 153.84900 |
PSA | 64.18000 |
LogP | 1.29640 |
外观性状 | Powder | reddish-brown |
蒸气压 | 12600mmHg at 25°C |
溶解性 | insoluble H2O [HAW93] |
稳定性 | 遵照规定使用和储存则不会分解。较稳定,不被水分解,也不被空气氧化,不溶于水、稀酸和碱以及大多数的有机溶剂中。当加热到红热时它就燃烧并转变成二氧化锆。在高于800℃的温度下不经熔化而分解或升华。 |
储存条件 | 密闭于阴凉干燥环境中 |
相关文档
化学品安全说明书(MSDS)
下载MSDS质检证书(COA)
相关产品
Section 1: Product Identification Chemical Name:Zirconium (IV) sulfide, 99% CAS Registry Number:12039-15-5 Formula:ZrS2 EINECS Number:234-885-1 Chemical Family:metal chalcogenides Synonym:Zirconium disulfide
Section 2: Composition and Information on Ingredients IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL) Title Compound12039-15-5100%5mg/m3 (as Zr)5mg/m3 (as Zr) Section 3: Hazards Identification Forms highly toxic and flammable hydrogen sulfide gas on exposure to acids or stomach fluids. Material is Emergency Overview: irritating to skin, eyes, and respiratory tract. Primary Routes of Exposure:Ingestion, inhalation, skin and eyes Eye Contact:Causes moderate irritation of the eyes. Skin Contact:Causes slight irritation of the skin. Inhalation:Inhalation of dust will lead to irritation of the respiratory tract. Hydrogen sulfide gas, if formed, is poisonous. Irritating to the nose, mucous membranes and respiratory tract. Gastric juices may cause release of toxic Ingestion: hydrogen sulfide. Irritating to skin, eyes and respiratory tract. Hydrogen sulfide gas may cause painful conjunctivitis, headache, Acute Health Affects: nausea, dizziness, pulmonary edema and possible death. Chronic Health Affects:No information available on long-term chronic effects. NTP:No IARC:No OSHA:No SECTION 4: First Aid Measures Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need Eye Exposure: assistance in keeping their eye lids open. Get immediate medical attention. Wash the affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if Skin Exposure: irritation persists. Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty Inhalation: in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce Ingestion: vomiting only if directed by medical personnel. SECTION 5: Fire Fighting Measures Flash Point:not applicable Autoignition Temperature:no data Explosion Limits:no data Extinguishing Medium:carbon dioxide or dry powder If this product is involved in a fire, fire fighters should be equipped with a NIOSH approved positive pressure Special Fire Fighting Procedures: self- contained breathing apparatus and full protective clothing. Hazardous Combustion andIf involved in a fire this material may emit irritating fumes of hydrogen sulfide and sulfur dioxide. Decomposion Products: Dust may form explosive mixtures with air. Contact with acids gives off hydrogen sulfide, a toxic and Unusual Fire or Explosion Hazards: flammable gas. SECTION 6: Accidental Release Measures In the case of a spill, the fine powder should be covered with dry sodium carbonate or dolomite in order to Spill and Leak Procedures: reduce the formation of dust. Sweep up the mixture. SECTION 7: Handling and Storage Store in a tightly sealed container. Exposure to the atmosphere may lead to release of toxic hydrogen sulfide Handling and Storage: gas. Empty containers may retain product residues that evolve toxic gases. SECTION 8: Exposure Controls and Personal Protection Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory. Skin Protection:Wear appropriate chemical resistant gloves and protective clothing. Ventilation:If possible, handle the material in an efficient fume hood. If ventilation is not available a respirator should be worn. The use of a respirators requires a Respirator Respirator: Protection Program to be in compliance with 29 CFR 1910.134. Ventilation:If possible, handle the material in an efficient fume hood. Additional Protection:No additional protection required. SECTION 9: Physical and Chemical Properties Color and Form:-200 mesh reddish-brown pwdr. Molecular Weight:155.35 Melting Point:1550° Boiling Point:no data Vapor Pressure:no data Specific Gravity:3.87 Odor:odor of sulfur Solubility in Water:insoluble SECTION 10: Stability and Reactivity Stability:air and moisture stable Hazardous Polymerization:no hazardous polymerization Conditions to Avoid:Contact of dust cloud with an ignition source. Incompatibility:Oxidizing agents and mineral acids Decomposition Products:hydrogen sulfide, sulfur dioxide, and metal oxides. SECTION 11: Toxicological Information RTECS Data:No information available in the RTECS files. Carcinogenic Effects:no data Mutagenic Effects:no data Tetratogenic Effects:no data SECTION 12: Ecological Information Ecological Information:No information available SECTION 13: Disposal Considerations Disposal:Dispose of according to local, state and federal regulations. SECTION 14: Transportation Shipping Name (CFR):Non-hazardous Hazard Class (CFR):NA Additional Hazard Class (CFR):NA Packaging Group (CFR):NA UN ID Number (CFR):NA Shipping Name (IATA):Non-hazardous Hazard Class (IATA):NA Additional Hazard Class (IATA):NA Packaging Group (IATA):NA UN ID Number (IATA):NA SECTION 15: Regulatory Information TSCA:Listed in the TSCA inventory. SARA (Title 313):Title compound not listed. Second Ingredient:none SECTION 16 - ADDITIONAL INFORMATION N/A |