5-氯-2-甲氧基苯磺酰氯, 99%|5-Chloro-2-methoxybenzenesulfonyl chloride|cas:22952-32-5|西域试剂

5-氯-2-甲氧基苯磺酰氯, 99%,5-Chloro-2-methoxybenzenesulfonyl chloride

产品编号：西域试剂-WR202345| CAS NO：22952-32-5| MDL NO：MFCD00052959| 分子式：C₇H₆Cl₂O₃S| 分子量：241.1

本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用，

货号	价格	库存与货期
西域试剂-WR202345	￥72.00	杭州北京（现货）
西域试剂-WR202345	￥214.00	杭州北京（现货）
西域试剂-WR202345	￥858.00	杭州北京（现货）
西域试剂-WR202345	￥2444.00	杭州北京（现货）

增值税发票√顺丰快递√订货电话：18601927057

英文名称	5-Chloro-2-methoxybenzenesulfonyl chloride
CAS编号	22952-32-5
产品熔点	100-104 °C
产品沸点	344.6±32.0 °C at 760 mmHg
产品密度	1.5±0.1 g/cm3
产品闪点	162.2±25.1 °C
精确质量	239.941467
PSA	51.75000
LogP	2.96
外观性状	白色结晶粉末
蒸气压	0.0±0.7 mmHg at 25°C
折射率	1.550
稳定性	如果遵照规格使用和储存则不会分解避免接触氧化物，水分/潮湿，碱
储存条件	保持贮藏器密封放入紧密的贮藏器内，储存在阴凉，干燥的地方

化学品安全说明书(MSDS)

下载MSDS

质检证书(COA)

相关产品

CAS号：22952-32-5

5-氯-2-甲氧基苯磺酰氯, ...

￥72.00

危害码 (欧洲)	C:Corrosive;
风险声明 (欧洲)	R34
安全声明 (欧洲)	S8-S45-S36/37/39-S26
危险品运输编码	3261
包装等级	II
危险类别	8
海关编码	2909309090

Name:	5-Chloro-2-methoxybenzenesulfonyl chloride Material Safety Data Sheet
Synonym:	None
CAS:	22952-32-5

Section 1 - Chemical Product MSDS Name:5-Chloro-2-methoxybenzenesulfonyl chloride Material Safety Data Sheet
Synonym:None

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

CAS#	Chemical Name	content	EINECS#
22952-32-5	5-Chloro-2-methoxybenzenesulfonyl chlo	100	unlisted

Hazard Symbols: C
Risk Phrases: 34

Section 3 - HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause systemic effects.
Chronic:
Effects may be delayed.

Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam. Do NOT get water inside containers.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Do not get water inside containers.

Section 7 - HANDLING and STORAGE
Handling:
Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Do not allow contact with water. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area. Store protected from moisture.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 22952-32-5: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 101 -103 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C7H6Cl2O3S
Molecular Weight: 241.0062

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Not currently available.
Conditions to Avoid:
Dust generation, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 22952-32-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
5-Chloro-2-methoxybenzenesulfonyl chloride - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: Pseudomonas putida:

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 22952-32-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 22952-32-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 22952-32-5 is not listed on the TSCA inventory.
It is for research and development use only.

SECTION 16 - ADDITIONAL INFORMATION
N/A