Eye ContactCheck for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at
least 15 minutes. Get medical attention.
Skin ContactIn case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated
clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention
immediately.
Serious Skin ContactNot available.
InhalationIf inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get
medical attention immediately.
Serious InhalationEvacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or
waistband. If breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth
resuscitation. WARNING: It may be hazardous to the person providing aid to give mouth-to-mouth resuscitation
when the inhaled material is toxic, infectious or corrosive. Seek immediate medical attention.
IngestionIf swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by
mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical
attention immediately.
Serious IngestionNot available.

---

Section 5. Fire and Explosion Data
Flammability of the Product May be combustible at high temperature.
Auto-Ignition Temperature Not available.
Not available.
Flash Points
Not available.
Flammable Limits
Products of CombustionThese products are carbon oxides (CO, CO2), halogenated compounds. Some metallic oxides.
Fire Hazards in Presence of Slightly flammable to flammable in presence of heat.
Various Substances
Explosion Hazards in Presence Risks of explosion of the product in presence of mechanical impact: Not available.
Risks of explosion of the product in presence of static discharge: Not available.
of Various Substances
Fire Fighting MediaSMALL FIRE: Use DRY chemical powder.
and InstructionsLARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Not available.
Special Remarks on
Fire Hazards
Special Remarks on Explosion Not available.
Hazards

---

Section 6. Accidental Release Measures
Small SpillUse appropriate tools to put the spilled solid in a convenient waste disposal container.
Large SpillPoisonous solid.
Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to
reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Eliminate all ignition
Tetraphenylarsonium Chloride

---

Section 7. Handling and Storage
PrecautionsKeep away from heat. Keep away from sources of ignition. Ground all equipment containing material. Do not
ingest. Do not breathe dust. Wear suitable protective clothing. If ingested, seek medical advice immediately and
show the container or the label. Keep away from incompatibles such as oxidizing agents.
StorageKeep container tightly closed. Keep container in a cool, well-ventilated area.

---

Section 8. Exposure Controls/Personal Protection
Engineering ControlsUse process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below
recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to
airborne contaminants below the exposure limit.
Personal ProtectionSafety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used
a Large Spillto avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist
BEFORE handling this product.
Exposure LimitsTWA: 0.5 (mg(As)/m3)(as Arsenic) from OSHA (PEL) [United States]
TWA: 0.1 (mg(As)/m3)(as Arsenic) from ACGIH (TLV) [United States]
Consult local authorities for acceptable exposure limits.

---

Section 9. Physical and Chemical Properties
Physical state and appearance Solid.OdorNot available.
Not available.
Taste
Molecular Weight418.8 g/mole
Not available.
Color
Not available.
pH (1% soln/water)
Boiling PointNot available.
258°C (496.4°F) - 260 C.
Melting Point
Critical TemperatureNot available.
Specific GravityNot available.
Vapor PressureNot applicable.
Vapor DensityNot available.
Not available.
Volatility
Odor ThresholdNot available.
Water/Oil Dist. Coeff.Not available.
Ionicity (in Water)Not available.
Dispersion PropertiesNot available.
SolubilityNot available.

---

Section 10. Stability and Reactivity Data
StabilityThe product is stable.
Instability TemperatureNot available.
Conditions of InstabilityExcess heat, incompatible materials
Incompatibility with various Reactive with oxidizing agents.
substances
Tetraphenylarsonium Chloride
CorrosivityNot available.
Special Remarks onNot available.
Reactivity
Special Remarks onNot available.
Corrosivity
PolymerizationWill not occur.

---

Section 11. Toxicological Information
Routes of EntryInhalation. Ingestion.
Toxicity to AnimalsLD50: Not available.
LC50: Not available.
Chronic Effects on Humans Not available.
Other Toxic Effects onNo specific information is available in our database regarding the other toxic effects of this material for humans.
Humans
Special Remarks onNot available.
Toxicity to Animals
Special Remarks onNot available.
Chronic Effects on Humans
Special Remarks on otherNot available.
Toxic Effects on Humans

---

Section 12. Ecological Information
Not available.
Ecotoxicity
BOD5 and CODNot available.
Products of BiodegradationPossibly hazardous short term degradation products are not likely. However, long term degradation products may
arise.
Toxicity of the ProductsThe products of degradation are as toxic as the product itself.
of Biodegradation
Special Remarks on theNot available.
Products of Biodegradation

---

Section 13. Disposal Considerations
Waste DisposalWaste must be disposed of in accordance with federal, state and local environmental
control regulations.

---

Section 14. Transport Information
DOT ClassificationCLASS 6.1: Poisonous material.
Identification: Organoarsenic compounds, n.o.s (Tetraphenylarsonium chloride) UNNA: 3280 PG: II
Special Provisions forNot available.
Transport
Tetraphenylarsonium Chloride
DOT (Pictograms)

---

Section 15. Other Regulatory Information and Pictograms
SARA 313 toxic chemical notification and release reporting: Arsenic compound (organic)
Federal and State
Regulations
CaliforniaCalifornia prop. 65: This product contains the following ingredients for which the State of California has found
to cause cancer which would require a warning under the statute: No products were found.
Proposition 65
Warnings
California prop. 65: This product contains the following ingredients for which the State of California has found
to cause birth defects which would require a warning under the statute: No products were found.
Other RegulationsOSHA: Hazardous by definition of Hazard Communication Standard (29 CFR 1910.1200).
EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.
WHMIS (Canada) CLASS D-1A: Material causing immediate and serious toxic effects (VERY TOXIC).
Other Classifications
DSCL (EEC)R23/25- Toxic by inhalation and ifS20/21- When using do not eat, drink or
swallowed.smoke.
S28- After contact with skin, wash immediately
with plenty of water.
S36/37- Wear suitable protective clothing and
gloves.
S45- In case of accident or if you feel unwell,
seek medical advice immediately (show the
label where possible).
Health Hazard
HMIS (U.S.A.)3 National Fire Protection
1 Flammability
1 Association (U.S.A.)
Fire Hazard
3 0 Reactivity
Health
Reactivity
0
Specific hazard
Personal Protection
E
WHMIS (Canada)
(Pictograms)
DSCL (Europe)
(Pictograms)
TDG (Canada)
(Pictograms)
ADR (Europe)
(Pictograms)
Protective Equipment
Gloves.
Tetraphenylarsonium Chloride
Lab coat.
Dust respirator. Be sure to use an
approved/certified respirator or
equivalent. Wear appropriate respirator
when ventilation is inadequate.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A