六氟锡酸锂(IV) ,lithium hexafluorostannate (iv) ,99.9%
产品编号:Bellancom-B252505| CAS NO:17029-16-2| 分子式:F6Li2Sn| 分子量:246.5824
本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用,
英文名称 | lithium hexafluorostannate (iv) |
---|---|
CAS编号 | 17029-16-2 |
精确质量 | 247.92500 |
LogP | 2.14040 |
外观性状 | Powder | white |
溶解性 | Insoluble in water. |
稳定性 | 常温常压下稳定 避免的物料:水分/潮湿 氧化物 酸 |
储存条件 | 常温密闭避光,通风干燥 |
相关文档
化学品安全说明书(MSDS)
下载MSDS质检证书(COA)
相关产品
危害码 (欧洲) | Xi: Irritant; |
---|---|
风险声明 (欧洲) | 36/37/38 |
安全声明 (欧洲) | 26-36 |
危险品运输编码 | UN3288 |
包装等级 | III |
危险类别 | 6.1 |
Section 1: Product Identification Chemical Name:Lithium hexafluorostannate (IV), 99% CAS Registry Number:17029-16-2 Formula:Li2SnF6 EINECS Number:none Chemical Family:halometallate salts Synonym:Dilithium tin hexafluoride
Section 2: Composition and Information on Ingredients IngredientCAS NumberPercentACGIH (TWA)OSHA (PEL) Title Compound17029-16-2100%2mg/m3 (as Sn)2mg/m3 (as Sn) Section 3: Hazards Identification Irritating to eyes and skin. Large doses of soluble lithium salts are toxic to the central nervous system and on Emergency Overview: repeated ingestion may damage kidneys and act as a teratogen Primary Routes of Exposure:Ingestion, Inhalation, skin, eyes Eye Contact:Causes irritation and serious eye damage. Effects may not immediately appear. Causes irritation, with redness and pain. Soluble fluoride may be corrosive. Effects may not appear Skin Contact: immediately Inhalation of dust may cause severe irritation to the respiratory tract, causing coughing, sore throat, and Inhalation: labored breathing. Ingestion:Ingestion may lead to dizziness, abdominal cramps, vomiting, bloody diarrhea, weakness, and convulsions. Large doses of lithium salts are toxic to the central nervous system. Irritating to skin, eyes and respiratory Acute Health Affects: tract. Lithium may cause kidney damage. May be a teratogen. Prolonged exposure to hydrolysable fluorine Chronic Health Affects:compounds can cause deterioration of bone and tooth structure. Prolonged exposure to dust of tin compounds may result in benign pneumoconiosis. NTP:No IARC:No OSHA:No SECTION 4: First Aid Measures Immediately flush the eyes with copious amounts of water for at least 10-15 minutes. A victim may need Eye Exposure: assistance in keeping their eye lids open. Get immediate medical attention. Wash the affected area with water. Remove contaminated clothes if necessary. Apply calcium gluconate jelly Skin Exposure: or water soluble calcium salts as antidote. Seek medical assistance. Remove the victim to fresh air. Closely monitor the victim for signs of respiratory problems, such as difficulty Inhalation: in breathing, coughing, wheezing, or pain. In such cases seek immediate medical assistance. Seek medical attention immediately. Keep the victim calm. Give the victim water (only if conscious). Induce Ingestion: vomiting only if directed by medical personnel. SECTION 5: Fire Fighting Measures Flash Point:not applicable Autoignition Temperature:none Explosion Limits:none Extinguishing Medium:None. Material is non-flammable. Special Fire Fighting Procedures:No special fire fighting procedures required. Hazardous Combustion andIf involved in a fire this material may emit corrosive fumes of hydrofluoric acid. Decomposion Products: Unusual Fire or Explosion Hazards: No unusual fire or explosion hazards. SECTION 6: Accidental Release Measures Small spills can be mixed with powdered sodium bicarbonate, lime, or calcium carbonate and swept up. Avoid Spill and Leak Procedures:raising dust. Spillage in areas not adequately ventilated may require an evacuation of area. Emergency response teams will require self-contained breathing apparatus. SECTION 7: Handling and Storage Handling and Storage:Store in a tightly sealed non-glass container away from moisture. SECTION 8: Exposure Controls and Personal Protection Eye Protection:Always wear approved safety glasses when handling a chemical substance in the laboratory. Skin Protection:Wear appropriate chemical resistant gloves and protective clothing. Ventilation:The material must be handled in an efficient fume hood. If in form of fine dust and ventilation is not available a respirator should be worn. The use of respirators Respirator: requires a Respirator Protection Program to be in compliance with 29 CFR 1910.134. Ventilation:The material must be handled in an efficient fume hood. Additional Protection:No additional protection required. SECTION 9: Physical and Chemical Properties Color and Form:white pwdr. Molecular Weight:246.56 Melting Point:no data Boiling Point:no data Vapor Pressure:not applicable Specific Gravity:no data Odor:none Solubility in Water:soluble SECTION 10: Stability and Reactivity Stability:air and moisture stable Hazardous Polymerization:no hazardous polymerization Conditions to Avoid:none Incompatibility:active metals and strong mineral acids Decomposition Products:Hydrofluoric acid, metal fluorides and metal oxyfluorides SECTION 11: Toxicological Information RTECS Data:No information available in the RTECS files. Carcinogenic Effects:no data Mutagenic Effects:no data Tetratogenic Effects:no data SECTION 12: Ecological Information Ecological Information:No information available SECTION 13: Disposal Considerations Disposal:Dispose of according to local, state and federal regulations. SECTION 14: Transportation Shipping Name (CFR):Non-hazardous Hazard Class (CFR):NA Additional Hazard Class (CFR):NA Packaging Group (CFR):NA UN ID Number (CFR):NA Shipping Name (IATA):Non-hazardous Hazard Class (IATA):NA Additional Hazard Class (IATA):NA Packaging Group (IATA):NA UN ID Number (IATA):NA SECTION 15: Regulatory Information TSCA:Not listed in the TSCA inventory. SARA (Title 313):Title compound not listed. Second Ingredient:none SECTION 16 - ADDITIONAL INFORMATION N/A |