茚,分析标准品,用于环境分析,GC≥99.9%

产品编号:西域质检-TM60903| CAS NO:95-13-6| 分子式:C9H8| 分子量:116.160

本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用,

货号 包装 价格 库存与货期 购买量 操作
西域质检-TM60903
290.00 杭州 北京(现货)
西域质检-TM60903
650.00 杭州 北京(现货)

增值税发票√顺丰快递√订货电话:18601927057

Reference Material

This certificate is designed in accordance with ISO 17034 and ISO Guide 31. This reference material (RM) was designed,produced and verified in accordance with ISO/IEC 17025, ISO 17034 and a registered quality management system ISO 9001.

Product Name(产品名称) Indene
Product Code(产品编号) 72228-250mg
Lot Number(产品批号) 22040281
CAS No. 95-13-6
Mol. Weight(分子量) 116.16
Mol. Formula(分子式) C9H8
Melting Point(熔点) -1.8℃(dec.)
Expiry Date(失效日期) 2029-Apr-11
Boiling point(沸点) N/A
Appearance(外观) Colorless to Light Yellow Liquid
Storage Temp(存储条件) (20±5)℃,Keep in the shade__
C E R T I F I E D
Purity
99.5%
C E R T I F I E D
Expanded Uncertainty (U)
0.5%
Uncertainty

The certified value(s) and uncertainty(ies) are determined in accordance with ISO 17034 with an 95% confidence level(k=2). Uncertainty is based on the Total Combined Uncertainty, including uncertainties of characterisation, homogeneity and stability testing. Stability values are based on real evidence opposed to simulation.

Traceability

The balances used for gravimetric measurements are calibrated with weights traceable to the national standards. The calibration of the balances is verified annually by an external accredited calibration service. This analysis method has been verified using an approach consistent with ISO 17034:2016 & ISO 17025:2017.

CERTIFICATE    ON QC    SIGNATURE
2022-Apr-12 RM Release
Method of Identification

HPLC/DAD

Method of Identification

HPLC/DAD

Intended Use

This RM is intended for use in a laboratory as a calibration and quality control standard or in method development for analytical techniques.

Storage

This reference material meets the specification stated in this certificate until the expiry date, provided it is stored unopened at the recommended temperature here in. If storage after opening is necessary, the RM should be tightly closed and kept from light and moisture.

Hazards

Read Material Safety Data Sheet (MSDS) and understand any potential hazard(s) prior to the use of this product. All chemicals should be considered potentially hazardous in nature and should only be handled by qualified personnel using established good laboratory practices.

Homogeneity

Random replicate samples of the final packaged RM have been analysed to prove homogeneity compliant with ISO 17034.

Instructions for use

It is recommended to use 1 mg as the minimum sample size and if less material is used, to increase the certified uncertainty by a factor of two for half sample and four for a quarter of sample.Visit the support section of our website technology videos and frequently asked questions.

相关文档

化学品安全说明书(MSDS)

下载MSDS

质检证书(COA)

相关产品


符号 GHS02 GHS08
GHS02, GHS08
信号词 Danger
危害声明 H226-H304
警示性声明 P301 + P310-P331
个人防护装备 Eyeshields;Faceshields;full-face respirator (US);Gloves;multi-purpose combination respirator cartridge (US);type ABEK (EN14387) respirator filter
危害码 (欧洲) Xn:Harmful;
风险声明 (欧洲) R10;R65
安全声明 (欧洲) S23-S24/25-S62
危险品运输编码 UN 3295 3/PG 3
WGK德国 1
RTECS号 NK8225000
包装等级 III
危险类别 3
Name: Indene Tech. 90% Material Safety Data Sheet
Synonym: None
CAS: 95-13-6
Section 1 - Chemical Product MSDS Name:Indene Tech. 90% Material Safety Data Sheet
Synonym:None

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
95-13-6 Indene >90 202-393-6
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Air sensitive.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause liver and kidney damage. May cause digestive tract disturbances.
Inhalation:
May cause respiratory tract irritation.
Chronic:
May cause liver and kidney damage. Repeated exposure may cause sensitization dermatitis.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Use water spray to keep fire-exposed containers cool. Combustible liquid. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Containers may explode when heated.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Use agent most appropriate to extinguish fire.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Keep under a nitrogen blanket. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep refrigerated. (Store below 4C/39F.)

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 95-13-6: United Kingdom, WEL - TWA: 10 ppm TWA; 48 mg/m3 TWA United Kingdom, WEL - STEL: 15 ppm STEL; 72 mg/m3 STEL Belgium - TWA: 10 ppm VLE; 49 mg/m3 VLE France - VME: 10 ppm VME; 45 mg/m3 VME Germany: 45 mg/m3 TWA Malaysia: 10 ppm TWA; 48 mg/m3 TWA Netherlands: 10 ppm MAC; 45 mg/m3 MAC Spain: 10 ppm VLA-ED; 48 mg/m3 VLA-ED Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: 1.7 hPa @ 20 C
Viscosity: Not available.
Boiling Point: 181 deg C @ 760.00mm Hg
Freezing/Melting Point: -1.8 deg C
Autoignition Temperature: Not available.
Flash Point: 78 deg C ( 172.40 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: insoluble
Specific Gravity/Density: .9920g/cm3
Molecular Formula: C9H8
Molecular Weight: 116.16

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Oxidizes when exposed to air. Stable. However may polymerize explosively if heated to the melting point.
Conditions to Avoid:
Incompatible materials, ignition sources, exposure to air, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: May occur.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 95-13-6: NK8225000 LD50/LC50:
CAS# 95-13-6: Inhalation, rat: LC50 = 14 gm/m3; Inhalation, rat: LC50 = 14000 mg/m3/4H.
Carcinogenicity:
Indene - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
Other No information available.

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 95-13-6: No information available.
Canada
CAS# 95-13-6 is listed on Canada's DSL List.
CAS# 95-13-6 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 95-13-6 is listed on the TSCA inventory.


SECTION 16 - ADDITIONAL INFORMATION
N/A

服务热线

13911702513
18601927057

微信客服