Anhydrotetracycline hydrochloride,99.68%

产品编号:Bellancom-118660| CAS NO:13803-65-1| 分子式:C22H23ClN2O7| 分子量:462.88

盐酸脱水四环素是四环素生物合成的前体,是一种有效的竞争性广谱四环素破坏酶抑制剂。盐酸脱水四环素是真核细胞中四环素控制基因表达系统的效应剂。

本网站销售的所有产品仅用于工业应用或者科学研究等非医疗目的,不可用于人类或动物的临床诊断或者治疗,非药用,非食用,

货号 包装 价格 库存与货期 购买量 操作
Bellancom-118660
950.00 杭州 北京(现货)
Bellancom-118660
1600.00 杭州 北京(现货)
Bellancom-118660
3200.00 杭州 北京(现货)
Bellancom-118660
5300.00 杭州 北京(现货)

增值税发票√顺丰快递√订货电话:18601927057

Anhydrotetracycline hydrochloride

产品介绍 Anhydrotetracycline hydrochloride 是一种四环素的生物合成前体,是一种有效的竞争性的四环素破坏酶 (tetracycline destructase enzymes) 广谱抑制剂。Anhydrotetracycline hydrochloride 是真核细胞中四环素控制的基因表达系统的效应子。
生物活性

Anhydrotetracycline hydrochloride, a tetracycline biosynthetic precursor, is a potent competitive broad-spectrum tetracycline destructase enzymes inhibitor. Anhydrotetracycline hydrochloride is an effector for tetracycline controlled gene expression systems in eukaryotic cells.

体外研究

Anhydrotetracycline hydrochloride inhibits Tet(50) (IC50=210 μM),Tet(X) (IC50=41 μM), Tet(X)_3 (IC50=3 μM) degradations of tetracyclines. Anhydrotetracycline hydrochloride inhibits Tet(50) (IC50=210 μM),Tet(X) (IC50=75 μM), Tet(X)_3 (IC50=26 μM) degradations of chlortetracycline. Anhydrotetracycline hydrochloride inhibits Tet(50) (IC50=120 μM),Tet(X) (IC50=41 μM), Tet(X)_3 (IC50=7 μM) degradations of demeclocycline.
Anhydrotetracycline hydrochloride inhibits Tet(50) (IC50=210 μM),Tet(X) (IC50=41 μM), Tet(X)_3 (IC50=3 μM) degradations of tetracyclines. Anhydrotetracycline hydrochloride inhibits Tet(50) (IC50=210 μM),Tet(X) (IC50=75 μM), Tet(X)_3 (IC50=26 μM) degradations of chlortetracycline. Anhydrotetracycline hydrochloride inhibits Tet(50) (IC50=120 μM),Tet(X) (IC50=41 μM), Tet(X)_3 (IC50=7 μM) degradations of demeclocycline.

西域 has not independently confirmed the accuracy of these methods. They are for reference only.

体内研究
体内研究
性状Solid
溶解性数据
In Vitro: 

DMSO : 20.83 mg/mL (45.00 mM; ultrasonic and warming and heat to 80°C)

配制储备液
浓度 溶剂体积 质量 1 mg 5 mg 10 mg
1 mM 2.1604 mL 10.8019 mL 21.6039 mL
5 mM 0.4321 mL 2.1604 mL 4.3208 mL
10 mM 0.2160 mL 1.0802 mL 2.1604 mL
*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液,再依次添加助溶剂:

——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用; 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶

  • 1.

    请依序添加每种溶剂: 10% DMSO    40% PEG300    5% Tween-80    45% saline

    Solubility: 2.08 mg/mL (4.49 mM); Suspended solution; Need ultrasonic

    此方案可获得 2.08 mg/mL (4.49 mM) 的均匀悬浊液,悬浊液可用于口服和腹腔注射。

    以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。

    将 0.9 g 氯化钠,完全溶解于 100 mL ddH₂O 中,得到澄清透明的生理盐水溶液
  • 2.

    请依序添加每种溶剂: 10% DMSO    90% (20% SBE-β-CD in saline)

    Solubility: ≥ 2.08 mg/mL (4.49 mM); Clear solution

    此方案可获得 ≥ 2.08 mg/mL (4.49 mM,饱和度未知) 的澄清溶液。

    以 1 mL 工作液为例,取 100 μL 20.8 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。

    将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中,再用生理盐水定容至 10 mL,完全溶解,澄清透明
*以上所有助溶剂都可在 西域 网站选购。
运输条件

Room temperature in continental US; may vary elsewhere.

储存方式

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

参考文献

相关文档

化学品安全说明书(MSDS)

下载MSDS

质检证书(COA)

相关产品


个人防护装备 Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter
危害码 (欧洲) Xn
风险声明 (欧洲) R63
安全声明 (欧洲) S36/37/39
危险品运输编码 NONH for all modes of transport
海关编码 1702190000
Name: Anhydrotetracycline Hydrochloride "can be used as Secondary Material Safety Data Sheet
Synonym: None
CAS: 13803-65-1
Section 1 - Chemical Product MSDS Name:Anhydrotetracycline Hydrochloride "can be used as Secondary Material Safety Data Sheet
Synonym:None

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
13803-65-1 Anhydrotetracycline Hydrochloride 100 unlisted
Hazard Symbols: XN
Risk Phrases: 63

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Possible risk of harm to the unborn child.Light sensitive.Moisture sensitive.Air sensitive.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation. The toxicological properties of this material have not been fully investigated.
Skin:
May cause skin irritation. The toxicological properties of this material have not been fully investigated.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Store protected from light. Store protected from air. Keep from contact with moist air and steam.
Storage:
Do not store in direct sunlight. Store in a tightly closed container. Store in a dry area. Store in a cool, dry, well-ventilated area away from incompatible substances. Do not expose to air. Store protected from moisture.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 13803-65-1: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: Not available.
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 223 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: > 223 deg C
Solubility in water: in water: 1:200 m/v
Specific Gravity/Density:
Molecular Formula: C22H22N2O7.HCl
Molecular Weight: 464.89

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, dust generation, moisture, exposure to air, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 13803-65-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Anhydrotetracycline Hydrochloride - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 63 Possible risk of harm to the unborn child.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37 Wear suitable protective clothing and
gloves.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 13803-65-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 13803-65-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13803-65-1 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

~%

13803-65-1结构式

13803-65-1

文献:Journal of the American Chemical Society, , vol. 79, p. 2849,2856
上游产品  1

下游产品  1

服务热线

13911702513
18601927057

微信客服